Farm King 1370 Скачать руководство пользователя страница 30

Страница: 30 / 146

Operation - 1370, 1385, 1395, 13114 Backsaver Auger

Figure 10

Retract the collar and slide the PTO driveline (Item
1) onto the tractor PTO shaft until it locks onto the
shaft. Push and pull on the PTO driveline to verify
it is securely attached to the PTO shaft. Install PTO
driveline safety chain (Item 2)

[Figure 10]

NOTE:

The PTO driveline must have a means to
retain it to the PTO shaft on the tractor.

WARNING

AVOID INJURY OR DEATH

Do NOT exceed 540 RPM PTO if equipped with
chain drive.

Do NOT exceed 1000 RPM PTO if equipped with
optional M1000 gearbox.

Keep PTO shields and all guards in place.

Keep away from moving parts.

Keep bystanders away.

Figure 11

Adjust the hitch in the mount. Attach at proper hole
(Item 1) depending on PTO rating. See identifying
decal

[Figure 11]

Содержание 1370



















































































































































Результаты поиска

Содержание 1370

Отзывы:

Farm King 1370, Руководство оператора и каталог запасных частей, Страница: 30 / 146

Результаты поиска

Содержание 1370

Отзывы: