Farm King 1370 страница 41 Скачать руководство пользователя | Manualshive

Страница: 41 / 146

background image

Operation - 1370, 1385, 1395, 13114 Backsaver Auger

39

TRANSPORTATION

Requirements

DANGER

ELECTROCUTION HAZARD

To prevent serious injury or death from
electrocution:

•

Be aware of overhead power lines.

•

Keep away from power lines when transporting the
auger.

•

Electrocution can occur without direct contact.

WARNING

Use of an unapproved hitch or tractor / tow vehicle
can result in loss of control, leading to serious
injury or death. Tractor / tow vehicle and hitch
must have the rated capacity to tow equipment.

CAUTION

Do not operate the unit before reading and
understanding the Operator Manual.

Make certain everyone is clear of the equipment
before applying power or moving the machine.

To avoid tipping, make sure auger is empty before
attempting to move.

Keep wheels of undercarriage level and on firm
ground.

Lower unit to the recommended transport position
before transporting.

Disconnect PTO driveline from the tractor before
moving or transporting.

IMPORTANT

Never exceed 20 mph (32 kph).

Do not move or transport the auger unless
the hopper and intake auger are in the raised /
transport position and securely fastened before
transporting.

Comply with federal, state, local and provincial
laws regarding the transport of farm equipment
on pubic roadways.

Verify that the tractor / tow vehicle are approved
for transporting the equipment and that the
equipment is securely attached to the tractor / tow
vehicle.

Verify safety chain is installed and properly
connected before transporting equipment.

Verify that the SMV (Slow Moving Vehicle) emblem,
all lights and reflectors are clean and visible.

Always attach a red flag to the end of the auger
when transporting on roads.

Disconnect the PTO driveline from the tractor
before transporting.

Transporting Guidelines

The ratio of the tractor / tow vehicle weight to the
loaded equipment weight plays an important role
in defining acceptable travel speed.

Travel speed: Acceptable travel speed.

Weight ratio: Weight of fully equipped or loaded
implement(s) relative to weight of tractor / tow
vehicle.

TRAVEL SPEED

WEIGHT RATIO

Up to 20 mph (32 kph)

1 to 1 (or less)

Up to 10 mph (16 kph)

2 to 1 (or less)

DO NOT TOW

More than 2 to 1

«
...
39
40
41
42
43
...
»

Содержание 1370



















































































































































Отзывы:

Нет отзывов

Похожие инструкции для 1370

Бренд: Gardena Страницы: 7

Бренд: SafetySpeed Страницы: 43

Бренд: Wacker Neuson Страницы: 32

Бренд: ReelCraft Страницы: 9

Бренд: Urrea Страницы: 6

Бренд: OMERA Страницы: 50

TrakFast TF1100

Бренд: RAMSET Страницы: 18

SIW 22T-A 1/2 inch

Бренд: Hilti Страницы: 46

Бренд: RST Instruments Страницы: 16

Бренд: NORDFOREST Страницы: 274

Бренд: HARTING Страницы: 4

Бренд: RIDGID Страницы: 2

Бренд: Cutech Страницы: 33

Бренд: Fayat Group Страницы: 112

Бренд: CMT ORANGE TOOLS Страницы: 4

Бренд: BAG Страницы: 8

Бренд: Nakayama Страницы: 57

Бренд: AEG Страницы: 53

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды