manualshive.com logo in svg

Faria Maestro, Руководство пользователя

Поделиться
Скачать
Faria Maestro Скачать руководство пользователя страница 88

Maestro Navigator 3.5.3.doc 

84 

 

The vertical axis shows the height of the tide.   
Time progression moves from left to right, and is shown in hourly increments on a 12-
hour scale.   
In the tide graph, blue indicates when the tide is flooding (rising); red shows when the 
tide is ebbing (falling).  
The dark and light gray shading above the line distinguishes day from night.  
The top of the graph provides you with additional data, including the station’s name, its 
distance from your vessel, the times of sun and moon rise and set, the phase of the 
moon, and the exact times and water levels of high and low tide.

  

 

Historical Tides 

When you first open the Tide Graph, it shows the present conditions.  All 24 hours for 
today’s date are shown, and a vertical dotted line indicates the present time.

  

 

For Researching Past and Future Conditions, use the buttons labeled -1 Day, -6 hrs, + 1 
Day, + 6 hrs to scroll the graph backward and forward in time.  As you change the day or 
hour, the graph scrolls to represent conditions at the specified time.  The date and time 
represented by the dotted vertical line will update as you scroll the graph.   
Press the 

Calendar

 button to select distant dates.   

Press the 

Now

 button to return to present conditions.   

Touch 

Close

 to close the tide graph. 

Note!   

The accuracy of the tide information displayed in Maestro Navigator depends on the 
accuracy of your system time. If you need to adjust the system time (for example, if the 
time shown as “now” in the tide graph does not seem correct), press the 

Set Time 

button in the NavPanel display.   

Содержание Maestro

































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды