manualshive.com logo in svg

Faria Maestro, Руководство пользователя

Поделиться
Скачать
Faria Maestro Скачать руководство пользователя страница 24

Maestro Navigator 3.5.3.doc 

20 

Depth Warning Data Window 

The Depth Warning data window displays a message on the screen to notify you if your 
present course appears to be taking you into an area shallow enough to ground your 
vessel. The data window tells you approximately how much time you have before you 
reach the area of possible collision.  With this advance warning, you can then adjust 
your course as necessary.

  

 

 

  
A warning message pops up on the screen when you reach the depth indicated in the 
Depth Warning setup screen, touch 

Acknowledge

 to close it.   

 

  
You can configure the Data Windows to visualize the Depth Warning in action. When the 
Data Window is set to display the Look Ahead graphic, you can see the upcoming 
impact zone represented by the red in the cross-section display.  If you want to monitor 
depth changes as you cruise, and you’re planning to keep an eye on the screen as you 
go, the Look Ahead option is a handy reference.  If you aren’t concerned about minor 
depth changes but you want something to get your attention in case of dangerous 
shallows, use the depth warning. 

 

The Depth Warning Data Window shows that the vessel is approaching dangerously 
shallow waters and the length of time until impact.  The remaining time is displayed in 
this countdown clock until course is changed.  

 

When the emergency is over, the countdown clock vanishes and the red lettering in the 
depth windows changes back to standard white. 

   

Содержание Maestro

































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды