Fargo HDP100, Руководство пользователя

Страница: 50 / 121

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP100 High Definition Card Printer/Encoder User Guide (Rev. Beta)
9
Troubleshooting the LCD Messages (continued)
LCD Message Cause Solution
Mag Verify Error Print could not verify
MAG write.
OR
The magnetic stripe was
not encoded properly.
See Resolving a Magnetic Verify
Error .
MULTIPLE FEED Two or more cards fed
from the Card Hopper. See Resolving a Card Not Fed
Error .
No Flip Module Two sided job sent to a
one sided Printer. See a No Flipper Table Module
Error .
No Prox Encoder You are trying to send
encoding data, but the
Printer is not configured
with this Encoder type. See Resolving a No Prox Card
Encoder Error .
Continued on the next page