RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP100 High Definition Card Printer/Encoder User Guide (Rev. Beta)
7
Reviewing the HDP100 Boot up Sequence
Step
Process
1
The Card feed stepper turns ON (to check for a card on the Flipper table).
2
The Lam Headlift turns until the head up position is returned from the Headlift
Sensor).
3
The Film transfer take-up Motor turns ON to take up any slack in the film.
4
The Print Headlift turns until head up position is returned from Headlift Sensor.
5
The Print Ribbon moves forward until it finds the yellow panel, pauses, advances
to magenta, then backs up to yellow (the Ribbon Sensor detects marks on the
ribbon).
6
The Transfer Ribbon advances forward two panels from supply (advances until
the Print Film Sensor senses 2 marks on the Film).
7
The Transfer Ribbon advances forward one panel from supply (advances until
the Print Film Sensor senses 1 mark on the Film).
8
The Transfer Ribbon reverses for one panel onto supply (reverses until the Print
Film Sensor senses 1 mark on the Film).
9
The Transfer Ribbon reverses for one panel onto supply (reverses until the Print
Film Sensor senses 1 mark on the Film).
