RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP100 High Definition Card Printer/Encoder User Guide (Rev. Beta)
8
Reviewing the Lamination Module Sequence of Operations
(Should this entire section be removed and added to the SEALS user manual or is the
ArSEALS to be contained in one all-inclusive manual?)
The LAM sequence of operations begins after printing has occurred with the Card Printer.
Step Process
1
The card is fed onto the Lamination Module Flipper Table.
2
The card is fed to the Card Position Sensor.
3
The Lamination Ribbon Motor begins cycling until the Lamination Sensor detects
the mark.
4
The Card Feed Motor activates to center the card on the Platen Roller.
5
The Transfer Roller Lift Motor cycles until the Transfer Roller Lift Sensor detects
state change.
Continued on the next page
