Fanvil X3 Скачать руководство пользователя | Manualshive

Страница: 27 / 92

background image

<

文档标题

>

Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] [email protected]

Beijing Tel:+86-10-5753-6809

Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-512-21997

5.2

Network Configuration

The device relies on IP network connection to provide service. Unlike traditional phone system

based on a circuit switched wire technology, IP devices are connected to each other over the

network and

exchange data in packet basis based on the devices‟ IP address.

To enable the device, the network parameters must be configured properly first. To configure

network parameters, user should open the network configuration screen through soft-menu

[Settings] ->

[Phone Settings] ->

[Network Configuration] from standby screen.

NOTICE! If user saw a

„Network Disconnected‟ icon flashing on top of the screen, it

means the network cable was not correctly connected to the device‟s network port. Please

check the cable is connected correctly to the device and to the network switch, router, or

modem.

There are three common IP configuration modes.



Dynamic Host Configuration Protocol (DHCP)

– This is the automatic configuration mode by

getting network configurations from a DHCP server. Users need not to configure any

parameters manually. All configuration parameters will be getting from DHCP server and

applied to the device. This is recommended for most users.



Static IP Configuration

– This option allows user to configure each IP parameters manually,

including IP Address, Subnet Mask, Default Gateway, and DNS servers. This is usually used in

an office environment or by power users.



PPPoE

– This option is often used by users who connect the device to a broadband modem or

router. To establish a PPPoE connection, user should configure username and password

provided by the service provider.

The device is default configured in DHCP mode.

«
...
25
26
27
28
29
...
»

Содержание X3





























































































Отзывы:

Нет отзывов

Похожие инструкции для X3

Бренд: NEC Страницы: 12

NEC Dterm Series E

Бренд: NEC Страницы: 44

Бренд: NEC Страницы: 11

Бренд: NEC Страницы: 4

UNIVERGE UM8500

Бренд: NEC Страницы: 3

Бренд: Uniden Страницы: 32

OpenScape Desk Phone CP400T

Бренд: Unify Страницы: 130

OpenScape Desk Phone CP100

Бренд: Unify Страницы: 36

Бренд: Uniden Страницы: 6

Бренд: ESI Страницы: 20

Бренд: Nortel Страницы: 56

Бренд: Audiovox Страницы: 40

Бренд: Telstra Страницы: 40

Бренд: Commax Страницы: 16

Бренд: Shiro Страницы: 23

Бренд: Ipevo Страницы: 4

Бренд: Bang & Olufsen Страницы: 76

Polycom VVX 310

Бренд: EarthLink Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды