Fantic Motor INTEGRA 140 TRAIL, Руководство пользователя и по обслуживанию

Страница: 83 / 94

07
7-11
Ed. 1 - 11/2017
3
Cleaning and Maintenance
- Identify the cause of the puncture:
· Inflate the defective inner tube using the bi-
cycle pump.
· Attempt to find the point where the air es-
capes.
· If it is possible to identify the air leak, twist
the inner tube around so that the valve is
pointing inwards.
- If the leak is located on the inner surface:
· Check that the rim protection band is posi-
tioned correctly in its housing.
· Check that all the spoke holes are covered. If
not, contact your vendor.
· Check the rim for signs of damage (sharp
edges, chips, splinters, etc.). If you notice any
damage of this type, contact your vendor.
· Check whether there are multiple puncture
holes located close to each other.
If so, it may indicate a “snake bite”, which is
caused by riding over sharp objects when
the tyre pressure is too low.
· If the rim is not damaged, fit a new inner
tube.
- If the leak is located on the outer surface:
· Position the inner tube next to the wheel
rim, complete with the tyre, in the alignment
in which they were fitted.
· Attempt to identify the area on the tyre that
corresponds to the point where the hole
is located in the inner tube. Items such as
thorns, small stones or fragments of glass
will often be found lodged in the tyre sur-
face.
· Remove any objects that may have caused
the damage carefully, using a fingernail, a
penknife or a similar object.
· In the event of extensive damage or tears,
replace the tyre.