Fantic Motor INTEGRA 140 TRAIL, Руководство пользователя и по обслуживанию

Страница: 33 / 94

03
3-5
Ed. 1 - 11/2017
Checks and inspections
3.g - Checking the handlebars
If the handlebars and the han-
dlebar joint are damaged or have
not been installed correctly it
may result in hazardous riding
conditions, falls and accidents.
- If you observe any defects on
these parts, or in case of doubt,
do not use your bicycle and
contact the vendor or a quali-
fied technician
- Visually inspect the handlebars
and the handlebar joint; the
joint must be parallel to the
front wheel rim and the han-
dlebars must be aligned per-
pendicularly.
- Block the front wheel between
your legs, grasp the handlebars
at either end and attempt to
turn them in both directions.
Attempt to rotate the handlebars inside the
handlebar joint using your hands.
None of the parts must move.
There should be no squeaking or creaking.
If any of the parts move, secure them correctly.
- Check that the gear change level, brake levers
and hand grips are mounted securely on the
handlebars.
Attempt to move the lever using your hands
(one at a time).
None of the parts must move.
There should be no squeaking or creaking.
If any of the parts move, secure them correctly.
- While squeezing the front brake lever, perform
a series of short, sharp backward and forward
movements; make sure that there is not any
play in the steering system.
There should be no squeaking or creaking.
Contact the vendor or a specialised technician
in the event of any defects.