Fantech FQ80 Скачать руководство пользователя страница 3

3

Wiring Diagram

Maintenance

1.  Turn the power off and lock it out prior to servicing or cleaning.
2.

To clean the grille, first remove it from the fan then use a soft brush and 

clean water to remove the dirt. If the dirt is not easily removed, wash with 

a neutral detergent.

3.  In order to remove the impeller and housing for maintenance, first remove 

the light, night light and reflector (if applicable). Then unplug the electrical 

connection and remove the 4 screws that secure the fan assembly to the 

housing. To clean the impeller and housing, remove the motor and then wash 

with water or a neutral detergent, as required.

NOTE:

 

Keep all electrical components away from water. Do not use corrosive chemi-

cals or water in excess of 60C (140°F) to clean plastic parts.

For Fan-Light Combination

For Fan Only Units

Fan Specifications

Model

Power Consumption (W)

Airflow (CFM)

Power

Motor

Light (CFL)

Night Light

FQ80

120V/60 Hz

25

80

FQ110

120V/60 Hz

30

110

FQ80FL

120V/60 Hz

25

26W

4W

80

FQ110FL

120V/60 Hz

30

26W

4W

110

Specifications

Power supply 

protective tube

Housing

Fan outlet

Ceiling joist

Ceiling

Wire box

Wire box cover

Hanger bar

Spacing A on center joist

Insert Suspension bracket

16 inches

Figure 3-1

24 inches

Figure 3-2

Joists

A

Plug-in

Figure 7

Содержание FQ80













Отзывы: