23
2) Entering the standard weight
ENSURE THE WEIGHING HOPPER IS EMPTY!
•
Press .
The cursor starts flashing at Standard weight.
•
Press .
•
Enter the value of the standard weight (e.g. 10.00 kg)
•
Press .
The cursor starts flashing at the end of the line.
•
Place the standard weight in the weighing hopper.
•
Press .
NO changes into YES.
•
Press .
YES changes into NO.
•
Note the standard weight on the installation report (appendix 2).
Expected and measured
•
Press twice.
The following will appear on the display:
The computer automatically sets the readout to zero before dosing in ingredients.
The realized (expected) consumption and the actual (measured) consumption can be entered using the
feed receipts. The 771 then calculates the difference between both values in terms of percentage. This
calculated difference can be adjusted as fine adjustment in the weigher calibration by setting the
Correction? setting to YES.
21
1x
1x
#
#
#
1x
21
1x
1x
3x
Setting to zero
Agreed? NO
Weight 0.00
Standard weight 0.00
Agreed? NO
Measured consumption
0
Measured consumption
0
Expected consumption
0
Difference 0.00 %
Correction? NO
