9
Fancom 771
INSTALLER: 4. Mounting and installation
If the valves are controlled indirectly by direct current motor controlled valves, a specially developed
current detection board can be used to protect the direct current motor on the valve. This current
detection board is not necessary in this case, but is recommended by Fancom. The current detection
board can only be used with indirectly controlled direct current valves.
For connection of the current detection board, refer to the connection diagram of the current detection
board concerned.
The communication between PC and one or more 700-systems is network communication. The network
wiring is similar to the communication wiring with the different stations. Several PCs can be hooked up
in the network (maximum 32 700-systems and PCs).
A special network card has to be installed in the PC to enable communication with the 700-system. For
installation of this card and installation of the communication software on the PC (F_Central program),
refer to the F_Central program manual.
Program version C1.00 of the F_Central for DOS program or higher, or F-Central for Windows is
required for network communication between the PC and the 700-system.
4.12 Connecting the current detection board
4.13 Central operation using a PC
4.14 Installation of the PC
☞
