37
ENGLISH
TRIG:
Here you can set how loud the sounds are to be output when the TRIG button is pressed - i.e.
when pre-listening. A range from -48 to 0 dB is available (factory setting -6 dB). You can also switch
off the pre-listening function of the TRIG button. To do this, select the value "off".
INIT
↓
:
This function allows you to restore the Hybrid Pro module to its factory default state. Turn
the DATA knob to select the range you want to reset. Once you have selected the desired value, press
the DATA knob
↓
while holding down the More button. There are several options available to you:
Unit ->
resets all settings of the MIXER-UNIT menu
Kit1 bis 100 –>
resets only the settings of the selected kit
KtPrg ->
resets the order of the kits to the factory settings
All ->
resets all kits and the order
When you have successfully completed the operation,
Done
appears in the display. If
NoChg
appears, the system has not made any changes.
8.11 MEM
On this page you can read information about the memory usage (DATA button and DATA
knob are without function)
FLASH:
Displays the size of the internal flash memory.
USED:
Percentage of the flash memory that is occupied.
FREE:
Percentage of the flash memory that is still free and available to you for additional sound files.
If you often copy additional sounds to your
Fame Hybrid Pro
, it may happen that there is not
enough memory available. In this case you should clean up your module to make room for new
sounds. Make a back-up of all contents of your module and in the second step delete those sounds
from the module that you do not like. This way you create free memory and still have archived all of
the Fame Sounds
including the valuable Simon Phillips and Marco Minnemann recordings.