34
ENGLISH
1+2!
: Signals from BUS 1 and BUS 2 are output at a fixed volume at sockets OUT1 and OUT2, which
then serve as additional individual outputs (Direct Out).
SUB
:
As an alternative to the complete signal of the internal mixer, you can create a so-called
"SUB-Mix". The SUB-Mix allows you to switch off individual channel groups of the mixer, so that they
are no longer present at the main output, for example.
The following signal groups are available:
: Drum-Channels: (Kick, Snare, Toms, Cymbals, HiHat, Perc)
: Line In-Signal
: Song-Signal
: Metronome
Select a group by turning the DATA knob and disable or enable the respective signal for the SUB mix
by pressing the knob while holding down the MORE button.
Song and Metronome
The "Song" ( ) and „Metronome“ ( )signals are treated separately in the SUB mix, although you
share a FADER (ACMP) in the internal mixer. The reason for this is that only one song or the
metronome can be selected per KIT. A distinction in the mixer is therefore not necessary. However,
settings in the SUB-Mix can be used to ensure that the metronome signal is only output via the
headphones (PHONS), regardless of the selected KIT.
PHONS
: Here you set which signal is to be used for the headphones output. As with "OUT1-2", the
options Mix and Sub are available. In addition, you can select various BUS groups: BUS1+2, BUS3+4.