Falcon E3840, Инструкция по установке, обслуживанию и эксплуатации, Страница: 27 / 37

23
12. Slide up the oil level sensor guard (E3840X & E3840FX only).
Oil level sensor guard raised for cleaning
13. Clean guard and sensor probe using a soft clean cloth and hot soapy water (E3840X & E3840FX
only).
NOTE: Care should be taken not to damage the oil level sensor probe located at the front
of the pan.
14. Remove bucket containing oil and replace with a suitable container for water.
15. Open drain valve. Allow water to drain into container below.
16. Use clean water to rinse fry pot and dry thoroughly.
17. Close drain valve.
18. Lower elements back into fry pot and replace element guard and baskets.
19. Slide down oil level sensor guard (E3840X & E3840FX only).
Oil level sensor guard lowered for cleaning
20. Pour away soiled water.
21. Discard used oil and thoroughly wash, rinse and dry bucket and oil suction pipe.
22. Replace strainer and micro- filter in oil bucket and return oil bucket to cradle.
23. Fill fry pot with clean oil to
-MIN- mark. (Section Figure 6).