Falcon E3840, Инструкция по установке, обслуживанию и эксплуатации, Страница: 1 / 37

IMPORTANT
The installer must ensure that the installation of the appliance is in conformity with these instructions
and National Regulations in force at the time of installation. Particular attention MUST be paid to
–
Gas safety (Installation & Use) regulations I.E.E. Regulations for Electrical Installations
Health & Safety at work, etc Act Electricity at Work Regulations
Local and National Building Regulations Fire precaution Act
This appliance has been UKCA/CE marked based on compliance with the relevant Electrical and
Electromagnetic Compatibility (EMC) Regulations/Directives for the voltages stated on the data plate.
WARNING - TO PREVENT SHOCKS, ALL APPLIANCES, GAS OR ELECTRIC, MUST BE EARTHED.
On completion of the installation, these instructions should be left with the Engineer-in-Charge
for reference during servicing. Further to this, the user instructions should be handed over to the
user, having had a demonstration of the operation and cleaning of the appliance.
IT IS MOST IMPORTANT THAT THESE INSTRUCTIONS BE CONSULTED BEFORE INSTALLING
AND COMMISSIONING THIS APPLIANCE. FAILURE TO COMPLY WITH THE SPECIFIED
PROCEDURES MAY RESULT IN DAMAGE OR THE NEED FOR A SERVICE CALL.
PREVENTATIVE MAINTENANCE CONTRACT
To obtain maximum performance from this unit regular servicing of the appliance should
be undertaken to ensure correct operation, it is functioning as intended, and safe to use.
We recommend servicing in accordance with SFG20 Maintenance Schedules and as a
minimum, after 2,500 hours of use, or annually, whichever comes first and that a
maintenance contract be arranged with an appointed service contact. Visits may then be
made at agreed intervals to carry out adjustments and repairs.
We recommend that the oil level sensor (Patent No. GB2584184 ) in the E3840X/E3840FX
model should be serviced annually.
WEEE Directive Registration No. WEE/DC0059TT/PRO
At end of unit life, dispose of appliance and any replacement parts in a safe
manner, via a licenced waste handler. Units are designed to be dismantled
easily and recycling of all material is encouraged whenever practicable.
This equipment is ONLY FOR PROFESSIONAL USE , and shall be operated by QUALIFIED
persons. It is the responsibility of the supervisor or equivalent to ensure that users wear SUITABLE
PROTECTIVE CLOTHING and to draw attention to the fact that some parts will, by necessity,
become VERY HOT and will cause burns if touched accidentally.
Falcon Foodservice Equipment
Wallace View, Hillfoots Road, Stirling, FK9 5PY, Scotland
P h o n e : 0 1 7 8 6 4 5 5 2 0 0
E3840/E3840X/E3840F/E3840FX
FRYERS
INSTALLATION, SERVICING and USER INSTRUCTIONS
CAUTION: Read the instructions before using the appliance
T101025 Ref.
8