Falco e-motors Intelligent energy management system, Инструкция по установке и руководство пользователя

Страница: 24 / 34

24
11.2 Heart Rate Monitor Pairing
To utilise this feature the Heart Rate Monitor MUST be an ANT+ monitor
otherwise it will not pair with our consoles. All other Heart Rate Monitor
units will require their own specific displays where required.
Step one:
Make sure that your HRM
is turned on.
Press and hold Key 4 for
approximately 5-­‐6
seconds until HRT is
displayed in Segment 1
and starts to blink.
Step 2:
After waiting for several
seconds Segment 1 will
start to display a number
(the user heart rate) and
HRT will remain on the
screen until the HRM is
turned off.
Note: your HRM will need
to be paired before each
use as the console
will
default to BAT (battery
voltage).