Falco e-motors Intelligent energy management system, Инструкция по установке и руководство пользователя

Страница: 10 / 34

10
5.2 Tools Required
Spanners: 17mm, 10mm, 8mm File
Allen Keys: 2,3,4,5,6mm Pump
Torx Key: T25 Heat Gun/Hair Dryer
Side Cutters/Snips
Flat Blade Screwdrive
Stanley Knife
5.4 Installing the Motor
5.3 Preparing the bicycle for Installation
Place your bicycle in a
work stand, remove the
rear wheel, remove the
right hand side crank
and chain wheel. Clean
your bike with a rag and
remove any excess oil
and dirt.
Step One:
Fit wheel finishing components to
the wheel, tyre and inner tube,
sprockets and disc brake rotor.