FAITHTECH
FTB9000 USER MANUAL
59
1. press
button
，
enter menu setting interface
；
2. selct“setting”->“Parallel machine”
，
press
button,Pop up the master and
slave parallel machine setting interface;
3. The "Master and Slave Settings" option is set to "Slave1" or "Slave2", etc. Each
number corresponds to one slave device and cannot be repeated. If there is only
one slave, the slave number must be set to "Slave1". If there are two slave
machines, one of them must be set to "Slave1", and the other one must be set to
"Slave2" and so on.otherwise the communication will fail.
The device is set as a slave, and the screen will automatically hide the unnecessary
configuration items after returning to the main interface.
Host Settings
Photo 3- 20Master/slave parallel setting
1. press
，
Enter the menu setting interface
；
2. select“setting”->“Parallel machine”
，
press
,Pop up the master and slave
parallel machine setting interface
；
3. Set “Master/Slave Settings” to Master.
4. The "number of slave machines" option is set to the actual number of slave
machines;
"Master and Slave Control" option is set to "On"
After setting parallel parameters
，
press
to Return to the main screen. At
this time, the host model and parameters will be updated to the new model after the
parallel machine.
