FAITHTECH
FTB9000 USER MANUAL
43
1. Switch to steady-state output function, set voltage to 12V, source current to 10A,
source power to 1000W, voltage slope to the maximum, current slope to the
maximum;
2. press
button
，
enter save interface
；
3. Enter the number 1
，
PRESS
button to put it into effect
，
Save parameters to
storage location 1
4. Change the steady-state output function parameters, set the voltage to 24V, the
source current to 20A, the source power to 2000W, the voltage slope to the
maximum, the current slope to the maximum;
5. press
button
，
enter save interface
；
6. Enter the number 2
，
press
buton to Put it into effect
，
Save the parameters
to storage location 2.
7. press
button
，
enter call interface
；
8. Enter the number 1
，
press
buton to Put it into effect
，
The parameter of
position 1 will be called, and the device will switch to the steady-state output
function. The voltage is set to 12V, the source current is set to 10A, the source
power is set to 1000W, and the voltage slope and current slope are maximum.
9. press
button
，
enter call interface interface
；
10. Enter the number 2
，
press
buton to Put it into effect
，，
The parameter of
position 2 will be called, and the device will switch to the steady-state output
function. The voltage is set to 24V, the source current is set to 20A, and the
source power is set to 2000W, with the maximum voltage slope and current
slope.
Quick call
1. press
button
，
enter menu setting interface
；
