Fairford synergy, Руководство пользователя

Страница: 124 / 233

Synergy Series Soft Start User Manual
MAN-SGY-017. Version 01. 27/06/2016
124
Supported Parameters
# Description Read
Only? Implemented?
1 Run Forward N Y
2 Run Reverse N N
3 Fault Rest N Y
4 Net Control N Y
5 Net Reference N N
6 Speed Reference N N
7 Torque Reference N N
8 Faulted Y Y
9 Warning Y Y
10 Running Forward Y Y
11 Running Reverse Y N
12 Ready Y Y
13 Ctrl From Net Y Y
14 Ref From Net Y N
15 At Reference Y N
16 Drive State Y Y
The EDS also describes the 25 Implicit Cyclic connections, each of which will set and/or get a combination of
the above parameters. The following examples are for connection 6 (Extended Control)
CIP Packet functionality – Extended Control
O -> T Packet (Control) Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0 – – #4 – #3 – – #1
Byte 1 – – – – – – – –
T -> O Packet (Status) Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0 – – #13 #12 – #10 #9 #8
Byte 1 #16
Note: When a cyclic connection is established and Bit4 (Net Control) is set, the network has
control of the Synergy soft starter and any other control from Synergy front touchscreen,
switches, or Modbus interface will be overridden.
The EDS File is available from the Fairford website:
http://www.fairford.com/download/ethernet-ip/
4. Communication (continued)