Fairford synergy, Руководство пользователя

Страница: 53 / 233

Synergy Series Soft Start User Manual
MAN-SGY-017. Version 01. 27/06/2016
53
3.9 Advanced Menu (continued)
Menu
Description Min Max Default Unit Reg. Type
PNU 7040
Advanced
Start Settings
Kick Start
Kick Start Time
Time that the torque pulse is
applied to load
Increase to provide more torque
If the load fails to break away.
Decrease if the motor
accelerates too quickly.
10 2000 100 ms Read/Write
PNU 640
Advanced
Start Settings
Kick Start
Kick Start Pedestal
Percentage of the supply voltage
applied to the motor during the
'kick' period
Increase to provide more torque
If the load fails to break away.
Decrease if the motor
accelerates too quickly.
30 80 75 % Read/Write
PNU 8320
Advanced
Start Settings
↓
Contactor Delay
Time allowed for external
contactors to close.
Increase if contactors are driven
by buffer relays or motor trips
on phase loss when start signal
applied
Decrease if response to start
signal needs to be improved
20 800 160 ms Read/Write
PNU 7296
Advanced
Stop Settings
↓
Stop Time
The time taken to soft stop from
full voltage or the iERS level to
the 'Stop Pedestal'
Normally set between 15 and 60
seconds. Actual time to get to
'Stop Pedestal' depends on the
"Stop Current Limit Level".
If set too long the motor may
reach zero speed before the end
of the time set. Refer to
"Automatic End Stop"
0 300 0 s Read/Write
3. Configuration and Parameters (continued)