Fairford synergy, Руководство пользователя

Страница: 123 / 233

Synergy Series Soft Start User Manual
MAN-SGY-017. Version 01. 27/06/2016
123
4.3 Ethernet /IP
This module provides (part number: AB6213) Ethernet /IP network communications. The module has two
RJ45 ports for daisy chain connection to multiple units.
The Ethernet /IP module is installed into the option module slot on the synergy unit. See Appendix B for
installation instructions.
4.3.1 Synergy Configuration
Synergy will configure automatically when the module is detected.
4.3.2 IP Configuration
See Section 4.2.2
4.3.3 Ethernet /IP Module Front Panel Indicators.
See Section 4.2.3
4.3.4 Ethernet /IP Functionality
The EtherNet/IP communication module offers the following functionality:
 CIP Parameter Object Support

Implicit and Explicit messaging
 Dual switched RJ45 communication ports
 10/100 Mbps full duplex

2 Input Words from the network master to Synergy
 2 Output Words from Synergy to the network master
4.3.5 Ethernet /IP Control
The drive profile used by the interface is currently that provided by the Anybus CC Module and is dictated
by the EDS file provided by HMS Industrial Networks.
The EDS describes parameters that can be accessed explicitly in an Acyclic manner. Not all of these
parameters are implemented in Synergy. See Table below. CIP paths from these parameters are described
in the EDS.
4. Communication (continued)
Figure 4.3.1 Ethernet /IP Communication Module (AB6223)