Fagor QC-PDS, Руководство по оборудованию

Страница: 264 / 420

  
Installation
8.
INSTAL
LAT
ION
Ele
ctrica
l co
nne
ctio
ns
302
Ref.2003
· 264 ·
QC-PDS
HARDWARE
For single-drives, size|9
The power connection for a spindle motor to a QC-DR-275-  , size|9
single-drive is made using a single-pole MPC-1x150 cable via the threaded
bolts U1/U, V1/V and W1/W found on the upper side of the of the drive. The
connection between the chassis and the protective earth (PE) is made via
the M8 screw of the protective earth (PE) also found on the upper part of
the drive. The shield of the single-pole MPC-1x150 power cable is
connected to the protective earth at both cable ends. On the drive side via
the chassis support provided with the drive. Next, the chassis is connected
to the protective earth (PE) via its M8 screw.
Be sure to strip the power cable to expose the shield at both ends. Use a
metal clamp complete this connection to the chassis support on the drive
side.
See figures.
F. H8/21
Power connection threaded bolts of the spindle motor to the single-drive,
size|9.
F. H8/22
Power connection of the spindle motor to the single-drive, size|9.
M10 M10 M10

QC-DR-275- 
TALLA|9
U1/U-V1/V-W1/W
QC-DR-275-

250 A
U1/U-V1/V-W1/W
PE
M
3
U 1 / U
U
V
W
M O T O R F M 9 - A 1 3 0
Q C - D R - 2 7 5 - X X
V 1 / V
W 1 / W
1
1
1
M P C - 1 x 1 5 0
s i n g l e - p o l e c a b l e p e r p h a s e
w i t h o u t t e r m i n a l s
S ³ 7 0 m m
2
S ³ 7 0 m m
2
P E P E
s h i e l d s t o t h e p r o t e c t i v e e a r t h
i n t h e c h a s s i s s u p p o r t
A d d i t i o n a l l y , c o n n e c t t h e c h a s s i s s u p p o r t t o t h e p r o t e c t i v e e a r t h
p r o t e c t i v e e a r t h s c r e w o f t h e
m o t o r t e r m i n a l b o x
p r o t e c t i v e e a r t h s c r e w
o f t h e d r i v e