Fagor 8055 FL, Руководство по эксплуатации

Страница: 34 / 210

·34·
Operating manual
CNC 8055
CNC 8055i
2.
O
PERATING
IN JO
G MODE
·TC· O
PTION
S
OFT
: V02.2
X
Introductio
n
2.1 Introduction
2.1.1 Standard screen of the TC mode
The standard screen of the TC mode offers the following data:
1. Clock.
2. This window may show the following data:
SBK When "single block" execution mode is selected.
DNC When the DNC mode is active.
P..... Number of the program currently selected.
Message "In position" - "Execution" - "Interrupted" - "RESET".
PLC messages.
3. This window shows the CNC messages.
4. This window may show the following data:
X, Z coordinates of the axes. The Ø symbol indicates that the axis is working in diameter.
In small characters, the axis coordinates referred to machine reference zero. These values are
useful when letting the user define a tool change point (see zone 6) The CNC shows this data
when text 33 of program 999997 has not been defined.
The coordinates of the auxiliary axes that are defined.
The "C" axis will only be displayed when it is enabled (G15) and may be governed manually with
the jog keys [C+] and [C-]. Being the X-C plane active, the coordinates shown correspond to the
transformed coordinates; not to the machine coordinates.
The actual spindle rpm (S symbol) or the actual rpm of the second spindle (S2 symbol).
5. The information shown in this window depends on the position of the left switch.
In all cases, it shows the axis feedrate "F" currently selected and the % of F being applied.
When feed-hold is active, the color of the feedrate value changes.
1 2 3
4
5
6
7
9
15:28:42 SBK P000002 IN POSITION
X
Z
S
00044.000
-00443.331
0
REFERENCE ZERO X 0000.000
REFERENCE ZERO Z 0000.000
00025.000
00000.013
00014.480
F 0100.000
% 080
T 02
S 0100
D 12
CHANGE POSITION
X 25.000 Z 85.000
% 115
SMAX 1000 RANGE 1
020.0000 8
10