Fagor 8055 FL, Руководство по эксплуатации

Страница: 157 / 210

Operating manual
CNC 8055
CNC 8055i
WORKING
WITH OPERATIONS OR
CYCLES
3.
·TC· O
PTION
S
OFT
: V02.2
X
·157·
Profilin
g cycl
e
For a rounded corner, define the rounding radius (R); for a chamfer, define the distance from the
theoretical corner to the chamfer point (C).
Deleting all the points of a profile.
Once all the desired points have been programmed, they may all be erased at once. To delete all
the programmed points at the same time, proceed as follows:
• Place the cursor on the text "DEF. PROFILE (max 12 points)" of the window where the points
are edited.
• In the instant the cursor is placed in this position, the text changes to: "CLEAR - Delete all the
points".
• At this moment, pressing [CLEAR] displays a window requesting confirmation to delete all the
points: Press the [ENTER] to delete all the points or [ESC] not to delete them.
Square corner. Rounded corner. Chamfered corner.