Fagor 8025 GP, Руководство по эксплуатации

Страница: 76 / 423

8025/8030 CNC OPERATING MANUAL 49
SPECIAL ASSISTED PROGRAMMING
During the edition of a canned cycle, whenever the corresponding preparatory function key has
been pressed, when the [HELP] key is pushed, the information corresponding to this canned
cycle will appear directly on the screen highlighting the parameter to be introduced.
Once the value has been introduced and in order to be able to continue with the edition of new
parameters, it is necessary to press the ENTER key.
If it is not required to program any parameter, as long as it is not obligatory to do so, the DELETE
key must be pressed.
As in the case of normal programming, the CL key deletes one character at a time and the
DELETE key deletes the whole value given to the current parameter.
At any time during this type of programming, if the [HELP] function key is pressed, the control
changes over to the normal assisted programming.
3.6.7.5. Save a program being edited (only on models with 512 Kb of memory).
Models having 512 Kb of part-program memory (MK, MGK, MSK, GPK, MIK, MGIK,
MSIK, GPIK) have an additional RAM memory for program editing and modification.
The program, or portion of it, being edited is entered again in memory when exiting the editing
mode.
If, for any reason, the CNC loses power while editing a program, all the data stored in the RAM
memory will be lost. In other words, all the changes made to the program will be lost but not the
program itself.
To avoid this problem, press [SAVE] once in a while so the CNC stores the current changes in
the user memory.
3.6.7.6. Copying a program.
This feature allows an existing program to be copied in the CNC memory, by designating it a
number which is different from the original.
To do this, press first [PROGram DIRectory] and then the [COPY] key.
The CNC will ask which number is that of the source program and which is the one for the new
program. After keying in each of them the ENTER key must be pressed.
Should there be no number keyed in as the original program, as there is another program with
the same number in the memory and the one keyed in as being new, or if there is not sufficient
memory in the CNC, a message will be displayed indicating the cause.