Fagor 8025 GP, Руководство по эксплуатации

Страница: 81 / 423

54 8025/8030 CNC OPERATING MANUAL
Three possibilities:
a) The selected program does not exist in the CNC memory. The screen will display:
DOES NOT EXIST IN MEMORY
- Press [CONTINUE]. We return to the status of section 3.7.1. or,
- Press OPERATE MODE. The operating mode menu will appear:
b) There is a program with the same number on the tape. When pressing ENTER the screen
will display:
ALREADY EXISTS IN THE CASSETTE
DELETE?
If deletion is not wanted:
- Press any key other than Y. This returns to the status of section 3.7.1.
If deletion is wanted:
- Press Y. The screen will display:
PROGRAM NUMBER: P —— DELETED
From this moment, the program starts to be transferred to the cassette, taking place
as described in possibility c).
c) The selected program exists at the CNC but not on the tape.
The transfer takes place normally. During this process the screen display:
SENDING
On completion the following text will appear:
PROGRAM NUMBER: P —— SENT
3.7.3.1. Transmission errors
Same as section 3.7.2.1.