Fagor 8025 GP, Руководство по эксплуатации

Страница: 82 / 423

8025/8030 CNC OPERATING MANUAL 55
3.7.4. Entering a program from a peripheral other than the FAGOR cassette recorder(2)
Same as section 3.7.2. (by means of an FAGOR cassette) except that the 2 key must be
pressed and a new error message may appear: MEMORY OVERFLOW
This indicates that CNC memory is full. The part of the program for which there was
capacity will have been recorded in the CNC.
Atention:
To enter a program from a peripheral other than the FAGOR cassette, the
following points must be taken into account:
The first thing that must be read after a series of NULL is a % followed
by the program number (99999 indicates machine- parameters). Followed
by LF.
The blocks are identified by an N located at the beginning of the line, i.e.
immediately after a LINEFEED. If anything is written between the
LINEFEED and the N, this will not be taken as the indicator of the block
number, but as an extra character.
Spaces, the RETURN key and the + sign are not taken into account.
The program ends with a series of more than 20 NULL, or with the
character ESCAPE or EOT.
3.7.5. Transferring a program to a peripheral other than the FAGOR
cassette recorder(3)
Same as section 3.7.3. (by means of an FAGOR cassette) except that the 3 key is pressed.
The CNC ends the program with the character ESC (ESCAPE).