Faema CARISMA S-1, Использование и установка, Страница: 51 / 148

A
English
21 EN
21. Defects - Malfunctions
Direct action by the customer
Before calling service personnel, to avoid useless expense, check whether the machine problem corresponds to one of
the cases listed below.
PROBLEM
The coffee machine is not
working.
The machine does not dispense
coffee.
/HDNIURPHGJHRI¿OWHUKROGHU
Coffee dispensing time too short.
Coffee drips out of machine.
Loss of water under the machine.
The machine display appears in
a different color and the "error"
message appears.
The enabled boiler resistance
symbol “
”, remains visible
on the display, but the coffee
machine does not reach its
operating pressure.
SOLUTION
Check the electricity supply.
Check that the plug is inserted into the socket
and that the line separator switch is closed
Check the position of the ON/OFF
switch ( 1 ).
Check the color of the display and if the “no
water” icon has appeared.
Check the water level in the reservoir.
Clean with the supplied brush.
8VHD¿QHUJULQG
Use new coffee.
Clean.
Use a coarser grind.
Empty the drain tray.
Check that the dispensing devices are
enabled. Use the general on-off switch (
1 )
to turn off the machine and then turn it on
again.
Remove the tray; unscrew the safety cap and
check the position of the safety thermostat.
CAUSE
No electricity supply.
Water reservoir empty.
The undercup gasket is dirty with
coffee residue.
C o f f e e g r o u n d t o o c o a r s e .
Coffee too old.
)LOWHU KROHV EORFNHG RU ¿OWHU KROGHU
outlet hole dirty.
&RIIHHJURXQGWRR¿QH
Drain tray full.
7KHZDWHU¿OOLQJSKDVHLQWKHERLOHU
or dispensing phase are particularly
prolonged.
Possible intervention of the safety
thermostat.
(*) To reset the thermostat, press the red switch until it
returns to its working position (Figure A).
If the anomaly continues after the device has been
reset, please contact the technical assistance service.
Thermostat in the correct
working position.
Thermostat to be
reset (*).
02_Carisma.indd 21 09/11/2017 17:07:02