Faema CARISMA S-1, Использование и установка, Страница: 44 / 148

*
SET
*
SET
1 2 3 4
5 6 7
8 9
10
English
14 EN
14. Setting the boiler temperature/steam keys
Version: Carisma A Quicksteam (wands: water - Quicksteam)
In the Quicksteam versions, the programming phase
includes setting the boiler temperature and the temperature
for the steam keys:
To access the programming
menu, press and hold the
center key
OK for at least
4 seconds.
An asterisk and the word
SET appear on the display.
Press the center key OK to
pass to the phase for setting
the
frothed steam key.
Note: Each time the center
programming key
OK is
pressed, the next screen
appears.
Use the + / - keys on the
side to set the boiler
temperature (value with
large characters).
Instant boiler temperature
Set temperature
Use the + / - keys on the side to set
the stop dispensing temperature
·ƒ&
The presence of reference marks
below the temperature follows
this logic:
1 MARK Setting phase
Stop temperature
Dispensing
2 MARKS Setting phase
Start air temperature
3 MARKS Setting phase
Stop air temperature
)URWKHG
key
Stop
GLVSHQVLQJ
temperature
R e f e r e n c e
Mark
Press the center key OK
and use the + / - keys on
the side to set the start air
temperature (compressor
working).
Press the center key OK
and use the + / - keys on
the side to set the stop air
temperature (compressor
not working).
Press the center key OK and then use the + / - keys on
the side to set the start air and stop air temperatures.
The hot steam key must be set at the same temperature.
Start air
temperature
Stop air
temperature
Press the center key OK and proceed to set the hot
steam key.
+RWNH\
Use the + / - keys on the side to set
the stop dispensing temperature
NH\·ƒ&
6WRSGLVSHQVLQJWHPSHUDWXUH
Start air
temperature
Stop air
temperature
Confirm and exit the
programming menu by
pressing the center key
OK .
02_Carisma.indd 14 09/11/2017 17:06:56