RIGHT- AND LEFT-HANDED APROLI 280/700 ROBUSTO
Aproli 280/700 Robusto is distinguished into
right-
and
left-handed
depending on which gate side it is installed to (gate closed, view
from inside): the distinction is very important as Aproli 280/700 Robusto comes, by factory default, with the rotation shaft already
preset to be installed either on to the right or left side of the gate.
PRELIMINARY STEP - CHECKING THE FIXING POINTS
It is fundamental that the arm be fixed onto the gate in a structural point.
The fixing of the operator back bracket depends on this point and consequently also the position/outlet of the tube for the electrical
connections and voltage supply (Pic. 4).
The gate post fixing bracket has two openings at the back side towards the gate post and two in the bottom: in this way it can meet
any application requirements (Pic. 4).
Pic. 3
Pic. 4
!
English
5
Aproli 280/700 Robusto, by factory default, is a handed unit and the rotation shaft is set
for either right or left installation, viewing the gate from inside, in closed position.
APROLI 280/700
Robusto
View from inside
Aproli 280/700 Robusto
left-handed
Aproli 280/700 Robusto
right-handed
!
IMPORTANT: it is required that the operator arm be fixed to the gate in a structural position, the most
suitable to take it, being the strongest and most robust. The position of the gate post fixing bracket and
therefore of the electric power cable inlet is to be established consequently.
External oil-hydraulic operator with articulated arm
for swinging gates mounted on large pillars
Gate post
fixing
bracket
Arm bracket
for on-the-
gate fixing
A
115
140
110
180 mm
130
235
istr_aproli280-700robusto_GB.ai 5 28/04/2022 14:43:05
