ELECTRICAL WIRING DIAGRAM AND LAYOUT OF THE ACCESSORIES
Before installing Aproli 280/700 Robusto it is advisable that preparatory works be carried out for all of the accessories required at
least to ensure safety and proper control of the system.
General layout: it is the installer’s care and responsibility to properly lay the tubes required for the electrical connections.
1 - 230 V - 50 Hz - 0,03 A magneto-thermal circuit breaker (cable section recommended to be 2,5 mm² beyond 100 m)
2 - Control box with plug-in radio receiver
3 - Aproli 280/700 Robusto, left-hand
4 - Flasher
5 - Photocell receiver
6 - Junction pit
7 - Photocell transmitter on post mount
8 - Ground gate stop in open position
[A]
9 - Photocell receiver on post mount
10 - Gate electric lock recommended beyond 2 m width per gate leaf
11 - Gate stop in closed position
[A]
12 - Photocell transmitter on post mount
13 - Keyswitch
14 - Radio transmitter
Pic. 2
English
4
[A]:
IMPORTANT: ground gate stops in open and closed gate positions are
most important for proper operations and therefore for the safety of the
system equipped with Aproli 280/700 Robusto.
!
APROLI 280/700
Robusto
13
External oil-hydraulic operator with articulated arm
for swinging gates mounted on large pillars
230 V - 50 Hz ±10%
4x1,5 mm²
2
3
4
1
7
8
9
11
10
12
13
4x1 mm²
4x1 mm²
4x1 mm²
4x1 mm²
2x1 mm²
2x1 mm²
2x1 mm²
5
6
2x1 mm²
RG58
14
istr_aproli280-700robusto_GB.ai 4 28/04/2022 14:43:05
