English
FIXING THE ARM
In order to mount the arm, it is required that the motor be supplied with voltage so it can rotate the square shaft towards the
opening direction of the gate
Pic. 9
Pic. 11
ADJUSTING THRUST FORCE
In order to adjust thrust power in opening and closing, turn the respective
adjusting screws on the motor pump casting (Pic. 10).
FITTING THE FRONT COVER BACK
Once setting is completed, first put the operator cover back and secure it by the screws, then close the flap by the key (Pic. 11).
Pic. 10
RED screw: closing force control
GREEN screw: opening force control
Clockwise = + force
Anticlockwise = - force
APROLI 280/700
Robusto
8
Aproli 280/700 Robusto
left
Aproli 280/700 Robusto
right
External oil-hydraulic operator with articulated arm
for swinging gates mounted on large pillars
istr_aproli280-700robusto_GB.ai 8 28/04/2022 14:43:06
