Via Mantova, 177/A - 37053 Cerea (VR) Italy
Ph. +39 0442 330422
Fax +39 0442 331054
[email protected] - www.fadini.net
English
GB
2012/19/UE
Directive
Re. disposal of electric
and electronic waste
DISPOSE PROPERLY OF MATERIALS
ARMFUL TO THE ENVIRONMENT
External oil-hydraulic operator with articulated arm
for swinging gates mounted on large pillars
APROLI 280/700
Robusto
Tighten
hard
GUIDANCE FOR PROPER USE
(for the end user)
• Transit across the gate is allowed only if motor is stopped; stand at safe distance during opening and/or closing cycles of the gate.
• Do not touch any components of the system while the operator is working.
• Do not allow children and/or people to stand in the proximity of a working operator.
• Keep all the accessories able to turn on the operator (transmitters, proximity readers, key-switches, etc.) out of the reach of the children.
• Do not run the system in case of anomalies.
DISPOSAL OF MATERIAL
: dispose properly of the packaging materials such as cardboard, nylon, polystyrene etc. through specializing
companies (after verification of the regulations in force at the place of installation in the field of waste disposal). Disposal of electrical and
electronic materials: to remove and dispose through specializing companies, as per Directive 2012/19/UE. Disposal of substances
hazardous for the environment is prohibited.
WARNINGS
For optimum performance of system over time according to safety regulations, it is necessary to perform proper maintenance and
monitoring of the entire installation: the automation, the electronic equipment and the cables connected to these. The entire installation
must be carried out by qualified technical personnel. Operator: maintenance inspection at least every 6 months, while for the electronic
equipment and safety systems an inspection at least once every month is required. The manufacturer, Meccanica Fadini snc, is not
responsible for non-observance of good installation practice and incorrect maintenance of the installation.
Advice for the end user
:
• clear the site of materials that may have deposited in the equipment and hinder its correct functioning (such as rests of insects, foliage,
stones, etc.); before carrying out this operation, switch off voltage supply;
• clean regularly the equipment by using a damp cloth. Do not use flammable substances such as alcohol, solvents or benzene: these
substances may cause explosions and/or damage the system.
MAINTENANCE
Pic. 15
Pic. 14
Manual override allows for Aproli 280/700 Robusto to be disengaged from the gate. This is possible by opening the flap in the front cover and
lowering the release lever. To engage it back, raise the lever until tightened but avoid overtightening (Pic. 15).
RELEASING FOR MANUAL OPERATIONS
GREASE
GREASE
GREASE
GREASE
20220428
istr_aproli280-700robusto_GB.ai 12 28/04/2022 14:43:08
