28 of 44
6.3 - BLADE SHARPENING
Proceed as follows:
x
Loosen the knob (38) holding the
sharpener (17) in place (fig. 30).
x
Lift
the sharpener (17) and turn 180° (fig.
31).
x
Carefully lower the sharpener (17) again,
the blade (16) will automatically be
centred between the two grinding wheels
fig. 32).
x
Tighten the knob (38) (fig. 33).
WARNING: Cutting hazard! Use
protective cut- and tear-resistant
gloves and perform all operations
with extreme care.
PAY ATTENTION AT ALL TIMES!
WARNING:
ALWAYS work with the blade
guard (9) fitted.
6.3 - BLADE SHARPENING
Proceed as follows:
x
Loosen the knob (38) holding the
sharpener (17) in place (fig. 30).
x
Lift
the sharpener (17) and turn 180° (fig.
31).
x
Carefully lower the sharpener (17) again,
the blade (16) will automatically be
centred between the two grinding wheels
fig. 32).
x
Tighten the knob (38) (fig. 33).
WARNING: Cutting hazard! Use
protective cut- and tear-resistant
gloves and perform all operations
with extreme care.
PAY ATTENTION AT ALL TIMES!
WARNING:
ALWAYS work with the blade
guard (9) fitted.
Содержание F250 VO
