Fac F250 VO, Руководство по эксплуатации и обслуживанию

Страница: 19 / 52

19 of 44
Failure to hold the product firmly in
place on the product holder could
cause the machine to cut uneven
slices.
x
Turn the knob (13) in order to set the
required slice thickness.
x
Bring the product holder (4) (with the
product) back from its limit of travel
(towards the blade) using either the
handwheel (12) or the fast forward lever
(11).
Draw the product holder (4) closer to
the blade so as to leave a space
between the product to be sliced and
the blade of between 0.5 cm and 1.0
cm.
4.3 - SLICING THE PRODUCT
x
Move the blade guard (9) to the left by
loosening the knob (9a).
WARNING:
Exercise great caution if the
blade guard (9) is not fitted; the
blade (16) is extremely sharp.
x
Hold the handle (6) and turn the
flywheel (7) clockwise in order to begin
blade rotation and the alternating
movement of the product holder (4)
(fig. 17).
Failure to hold the product firmly in
place on the product holder could
cause the machine to cut uneven
slices.
x
Turn the knob (13) in order to set the
required slice thickness.
x
Bring the product holder (4) (with the
product) back from its limit of travel
(towards the blade) using either the
handwheel (12) or the fast forward lever
(11).
Draw the product holder (4) closer to
the blade so as to leave a space
between the product to be sliced and
the blade of between 0.5 cm and 1.0
cm.
4.3 - SLICING THE PRODUCT
x
Move the blade guard (9) to the left by
loosening the knob (9a).
WARNING:
Exercise great caution if the
blade guard (9) is not fitted; the
blade (16) is extremely sharp.
x
Hold the handle (6) and turn the
flywheel (7) clockwise in order to begin
blade rotation and the alternating
movement of the product holder (4)
(fig. 17).