Fac F250 VO Скачать руководство пользователя страница 22

Страница: 22 / 52

22 of 44

5.1 - CLEANING THE SLICER

Unscrew knob (34) and lift the sliding

product holder (4) complete with pusher
arm (3).

Clean all dismantled parts and the

machine body just hot water (at a
temperature of not less than 30°C) and
a frothy biodegradable dishwasher
detergent.

Use a soft spongy cloth and, if
necessary, a nylon brush for the spiked
areas of the product holder (4) and
pusher (3).

The slicer SHOULD be cleaned
thoroughly at least once a day and
more frequently where necessary.

Clean the slicer before use if it has
been out of service for some time.

WARNING: Cutting hazard! Use
protective cut- and tear-resistant
gloves and perform all
operations with extreme care.
PAY ATTENTION AT ALL TIMES!

Remove the receiving tray (18).

5.1 - CLEANING THE SLICER

Unscrew knob (34) and lift the sliding

product holder (4) complete with pusher
arm (3).

Clean all dismantled parts and the

machine body just hot water (at a
temperature of not less than 30°C) and
a frothy biodegradable dishwasher
detergent.

Use a soft spongy cloth and, if
necessary, a nylon brush for the spiked
areas of the product holder (4) and
pusher (3).

The slicer SHOULD be cleaned
thoroughly at least once a day and
more frequently where necessary.

Clean the slicer before use if it has
been out of service for some time.

WARNING: Cutting hazard! Use
protective cut- and tear-resistant
gloves and perform all
operations with extreme care.
PAY ATTENTION AT ALL TIMES!

Remove the receiving tray (18).

Содержание F250 VO





















































Результаты поиска

Содержание F250 VO

Отзывы:

Похожие инструкции для F250 VO

Бренды по названию

Популярные бренды

Fac F250 VO, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание F250 VO

Отзывы:

Похожие инструкции для F250 VO

Бренды по названию

Популярные бренды