Fac F250 VO, Руководство по эксплуатации и обслуживанию

Страница: 11 / 52

11 of 44
1.7 - UNPACKING
the delivery note and this instruction
booklet are present and fully intact.
x
Should any faults be noted, such as:
- dents to the frame or guards;
- controls that are either not working
or broken;
- missing items or other problems;
please advise the courier,
manufacturer and service centre
immediately.
x
Carefully dispose of packaging
components (bands, cardboard,
polystyrene, polythene bags, etc.).
Packaging components (bands,
cardboard, polythene, etc.) can be
treated as municipal solid waste
and therefore disposed of without
any problem.
x
When taking delivery of the slicer, ensure
that the packaging is fully intact; if this is
not the case, please advise the courier or
local dealer immediately.
In order to remove the slicer from the
packaging, please proceed as follows:
x
Cut and remove the plastic bands.
x
Open the box and take out the instruction
booklet.
x
Proceed as described hereafter.
- Remove the protective cardboard
covers from inside the box.
- Lift the machine with great care and
place on a solid surface.
- Remove the plastic bag in which the
slicer is wrapped.
- Check that all components specified in
Fig. 2
– Removing the slicer from the packaging
1.7 - UNPACKING
the delivery note and this instruction
booklet are present and fully intact.
x
Should any faults be noted, such as:
- dents to the frame or guards;
- controls that are either not working
or broken;
- missing items or other problems;
please advise the courier,
manufacturer and service centre
immediately.
x
Carefully dispose of packaging
components (bands, cardboard,
polystyrene, polythene bags, etc.).
Packaging components (bands,
cardboard, polythene, etc.) can be
treated as municipal solid waste
and therefore disposed of without
any problem.
x
When taking delivery of the slicer, ensure
that the packaging is fully intact; if this is
not the case, please advise the courier or
local dealer immediately.
In order to remove the slicer from the
packaging, please proceed as follows:
x
Cut and remove the plastic bands.
x
Open the box and take out the instruction
booklet.
x
Proceed as described hereafter.
- Remove the protective cardboard
covers from inside the box.
- Lift the machine with great care and
place on a solid surface.
- Remove the plastic bag in which the
slicer is wrapped.
- Check that all components specified in
Fig. 2
– Removing the slicer from the packaging