Fac F250 VO, Руководство по эксплуатации и обслуживанию

Страница: 14 / 52

14 of 44
3.1
–
INSTALLING THE SLICER
Positioning the slicer (fig. 5)
x
If not using the optional stand, carefully
lift the slicer and position on a level
surface (fig. 5) that is dry and capable
of supporting the weight of both the
slicer and the product to be sliced (see
“Technical specifications”).
Ensure that there are no
obstructions to the movement of the
flywheel, carriage stroke and
loading of the product to be sliced.
Ensure that all slicer feet are
resting correctly on the work
surface.
x
Position the slicer in its allocated
workplace.
Use of stand (optional) (fig. 4)
x
If using the optional stand, this should be
positioned on the floor whilst checking
that it is level and that all three feet are
resting correctly on the ground.
x
Carefully lift the slicer and position on the
stand.
Ensure that all slicer feet are
resting correctly on top of the
stand.
Fig. 4
–
Use of stand
Fig. 5
–
Positioning the slicer
3.1
–
INSTALLING THE SLICER
Positioning the slicer (fig. 5)
x
If not using the optional stand, carefully
lift the slicer and position on a level
surface (fig. 5) that is dry and capable
of supporting the weight of both the
slicer and the product to be sliced (see
“Technical specifications”).
Ensure that there are no
obstructions to the movement of the
flywheel, carriage stroke and
loading of the product to be sliced.
Ensure that all slicer feet are
resting correctly on the work
surface.
x
Position the slicer in its allocated
workplace.
Use of stand (optional) (fig. 4)
x
If using the optional stand, this should be
positioned on the floor whilst checking
that it is level and that all three feet are
resting correctly on the ground.
x
Carefully lift the slicer and position on the
stand.
Ensure that all slicer feet are
resting correctly on top of the
stand.
Fig. 4
–
Use of stand
Fig. 5
–
Positioning the slicer