Fac F250 VO, Руководство по эксплуатации и обслуживанию

Страница: 18 / 52

18 of 44
4.1 - USING THE SLICER
x
Move the product holder (4) away as
far as its limit of travel (furthest from
the blade) using either the handwheel
(12) or the fast forward lever (11).
x
Position the product to be sliced on
the product holder (4) and hold in
place with the pusher (3) (so that it
can’t move), whilst adjusting the
height.
WARNING:
x
DO NOT use the slicer if not fully
physically and mentally fit.
x
DO NOT allow anyone to come near
to the slicer whilst you are using it.
x
Be extremely careful whilst
loading/unloading the product from
the product holder and whilst
actually slicing.
PAY ATTENTION AT ALL TIMES!
_______________________________
4.2 - PLACING PRODUCT ON PRODUCT
HOLDER
x
Turn the flywheel (7) in order to move
the carriage (5) to its forward limit
(towards the operator).
4.1 - USING THE SLICER
x
Move the product holder (4) away as
far as its limit of travel (furthest from
the blade) using either the handwheel
(12) or the fast forward lever (11).
x
Position the product to be sliced on
the product holder (4) and hold in
place with the pusher (3) (so that it
can’t move), whilst adjusting the
height.
WARNING:
x
DO NOT use the slicer if not fully
physically and mentally fit.
x
DO NOT allow anyone to come near
to the slicer whilst you are using it.
x
Be extremely careful whilst
loading/unloading the product from
the product holder and whilst
actually slicing.
PAY ATTENTION AT ALL TIMES!
_______________________________
4.2 - PLACING PRODUCT ON PRODUCT
HOLDER
x
Turn the flywheel (7) in order to move
the carriage (5) to its forward limit
(towards the operator).