FAAC A1400 AIR RD, Руководство пользователя

Страница: 40 / 118

A1400 AIR RDT 40 532119 04 - Rev. C
L/3 L/3 L/3
L
11
11
Ø 7 mm
53
3 4
1 1
3 4
5
11
9
4
3
7
7
8
9
6 6
10
7
8
11
Nm
8
6
2.5
Nm
2
10 mm
8 mm
6 mm

Tr
ansla
tion of the original instruc
tions
ENGLISH
10. INSTALL GLASS LEAVES
RISKS
PERSONAL PROTECTIVE EQUIPMENT
REQUIRED TOOLS
Ø 5-6.5 mm 45° M6 8 6-8
For manual lifting, arrange for 1 person every 20 kg to be lifted.
!
Comply with the glass thickness = 10-11 mm. 10-11 mm.
1. The glass must be drilled as shown
53
- .
2. Insert a bush in each hole of the glass
53
- .
3. Make 2 holes on the profiles of the gripper
53
- - . .
4. Cut 2 pieces of glass beading with the length equal to L.
5. Drill holes in the beadings in correspondence to the holes in the
glass
53
- .
6. 6. Insert Insert the 2 beadings in the profiles
53
- .
7. Clean the glass, insert the gripper.
!
Ensure the beading is in its housing.
8. Assemble the gripper as follows: insert in the 2 plates ele-
ments and .
9. Screw the 2 grub screws
53
- .
10. must be aligned with the fixing holes on the carriage
54
-
11. Insert 2 galvanised countersunk head screws in the holes
53
- .
!
The glass must be fully inserted until it touches the clamps on its
upper profile. If the grip of the clamp on the glass is not correct, the
glass might fall. The two clamp profiles must be aligned.
Adjust the position of the two plates on the leaf.
- Adhere to the dimensions set out in diagrams
104
or
105
and :
-
108
-
 106
for RIGHT single leaf automations
-
109
-
 107
for LEFT single leaf automations
-
110
-
 109
for DOUBLE leaf automations
For manual lifting, arrange for 1 person every 20 kg to be lifted.
Ø 8.5 mm
bush Ø internal 6 mm
Ø external 8 mm
Ø 6.5 mm with 45° flaring
Ø 5.0 mm with M6 tapping
Ø 7.0 mm
2 x M8
2 x M6 x 25 UNI 5933