F5 BIG-IP 10000 Series, Руководство по платформе

Страница: 29 / 68

Figure 5: Quick-install rail kit
For information about installing the platform using the quick-install rail kit, see the instruction guide provided
by the manufacturer, which is included with the kit hardware.
After installing the platform, secure it to the rack with the rail lock brackets that are provided. Attach the
front bezel to the unit by grasping the bezel using the indentations located on either side.
Installing the rail lock brackets
The rail lock brackets help secure a quick-install, rail kit-mounted platform to a rack.
1. Attach the rail lock brackets to each side of the unit using the M4 flat head screws that are included in
the kit.
2. Slide the unit into the rack, and then secure the rail lock brackets to the rack on each side of the unit
using the #8-32 captive thumb screws on the bracket.
Use 18 to 20 inch-pounds (2.0 to 2.3 Newton-meters) of torque on these screws.
About grounding the platform
You should ground the platform after you install it in a rack. The chassis ground lug is located on the back
of the platform.
Do not secure multiple bonding or grounding connectors with the same bolt. The grounding connectors do
not need to be removed to perform service or installation procedures. You can connect other bonding or
29
Platform Guide: 10000 Series