F5 BIG-IP 10000 Series Скачать руководство пользователя страница 32

Страница: 32 / 68

Configuring a management IP address using the LCD panel

You can use the LCD panel to configure the management IP address. The management IP address enables
you to access the BIG-IP

Configuration utility to configure other aspects of the product, such as the product

license, VLANs, and trunks. The options are located in the System menu.

Note: When using the LCD panel to configure the unit, be sure to use the Commit option to save all settings.

Press the X button to activate Menu mode for the LCD.

Press the Check button to select

System

To configure the management IP address using DHCP:

a) Press the Check button to select

DHCP

b) Press the Check button to select

enabled

To configure the management IP address manually:

a) Press the Check button to select

Management

b) Press the Check button to select

Address Type

, and then press the Check button again to select

either

IPv4

IPv6

c) Use the arrow keys to select

Mgmt IP

and press the Check button.

d) Use the arrow keys to configure the management IP address.
e) Use the arrow keys to select

Prefix Length

and press the Check button.

f) Use the arrow keys to configure the length of the routing prefix for the IPv4 or IPv6 management

IP address.

g) Use the arrow keys to select

Mgmt Gateway

and press the Check button.

h) Use the arrow keys to configure the default route for the management interface.

Use the arrow keys to select

Commit

and press the Check button.

Licensing the platform

Once the management IP address is configured for the platform, you can use the BIG-IP

Configuration

utility to license the appropriate BIG-IP software.

Using a Web browser, navigate to the management IP address that you assigned to the platform.

Use this format where

<mgmt_ip_address>

is the management IP address you assigned:

https://<mgmt_ip_address>

Type

admin

as the user name and

admin

as the password.

If this is the first time you have accessed the Configuration utility, the first screen you see is the License
screen.

Follow the instructions in the Configuration utility to license the platform.

Platform Installation

Содержание BIG-IP 10000 Series





































































Результаты поиска

Содержание BIG-IP 10000 Series

Отзывы:

F5 BIG-IP 10000 Series, Руководство по платформе, Страница: 32 / 68

Результаты поиска

Содержание BIG-IP 10000 Series

Отзывы: