F5 BIG-IP 10000 Series, Руководство по платформе

Страница: 16 / 68

1. Open a command prompt on the system.
2. Change to the
/config
directory.
cd /config
3. Using a text editor, such as vi or Pico, open the
/config/user_alert.conf
file.
4. Edit the file, as needed.
For example, add these lines to the end of the file to create a custom alert in which the front panel LEDs
indicate when a node is down:
alert BIGIP_MCPD_MCPDERR_POOL_MEMBER_MON_DOWN "Pool member (.*?):(.*?) monitor
status down."
{
snmptrap OID=".1.3.6.1.4.1.3375.2.4.0.10";
lcdwarn description="Node down" priority="1"
}
alert BIGIP_MCPD_MCPDERR_NODE_ADDRESS_MON_DOWN "Node (.*?) monitor status
down." {
snmptrap OID=".1.3.6.1.4.1.3375.2.4.0.12";
lcdwarn description="Node address down" priority="1"
}
alert BIGIP_MCPD_MCPDERR_POOL_MEMBER_MON_UP "Pool member (.*?):(.*?) monitor
status up."
{
snmptrap OID=".1.3.6.1.4.1.3375.2.4.0.11"
}
alert BIGIP_MCPD_MCPDERR_NODE_ADDRESS_MON_UP "Node (.*?) monitor status up."
{
snmptrap OID=".1.3.6.1.4.1.3375.2.4.0.13"
}
5. Save the file and exit the text editor.
Platform interfaces
Every platform includes multiple interfaces. The exact number of interfaces that are on the system depends
on the platform type.
Each interface on the platform has a set of properties that you can configure, such as enabling or disabling
the interface, setting the requested media type and duplex mode, and configuring flow control.
About managing interfaces
You can use the Traffic Management Shell (
tmsh
) or the BIG-IP
®
Configuration utility to manage platform
interfaces.
Viewing the status of a specific interface using tmsh
You can use
tmsh
to view the status of a specific interface on a platform.
1. Open the TMOS Shell (
tmsh
).
tmsh
16
The 10000 Series Platform