F5 BIG-IP 10000 Series, Руководство по платформе

Страница: 28 / 68

Warning: Due to the weight of the platform, at least two people are required to install this chassis into a
rack. Failing to use two people can result in severe personal injury or equipment damage.
1. Align the bracket's keyhole slots with the PEM (brand) fasteners on the side of the unit.
2. Slide the bracket toward the front of the unit to lock the bracket into place.
Important: You must secure the bracket to the unit using three of the flat head screws provided with
the platform.
3. Repeat steps 1 and 2 for the other bracket.
4. Secure the front-mounting brackets to the rack using four rack manufacturer-provided screws (two per
side).
The unit must be securely fastened to the rack to provide adequate stability and to prevent the unit from
falling out of the rack.
5. Attach the front bezel to the unit by grasping the bezel on either side using the indentations provided.
Note: Failure to use the indentations could result in pinched fingers.
If the rack you have does not provide adequate support for the unit, you might need a shelf kit. F5 recommends
using a shelf kit created by the rack manufacturer, if available.
About the quick-install rail kit
Use the quick-install rail kit if you want to be able to slide the unit in or out of the rack for maintenance
activities. The kit includes two rails (left and right) and eight #8-32 thumb screws. The rails snap into place
in the rack, and no tools are required to install a platform using this kit.
The rails are optimized for installation into square hole cabinets, but they can be installed in other cabinet
styles, such as round hole cabinets, using the screws provided. The rails are easily converted to mount to
either cabinet style.
28
Platform Installation