![background image](http://html1.mh-extra.com/html/f-f-group/gcs-425t-pro/gcs-425t-pro_original-instructions-manual_3084092015.webp)
English |
15
www.ffgroup-tools.com
GCS 425T PRO
SAW CHAIN
WARNING
It is very important for smooth and safe operation to
keep the cutters always sharp.
Your cutters need to be sharpened when:
f
Sawdust becomes powder-like.
f
You need extra force to saw in.
f
The cut way does not go straight.
f
Vibration increases.
f
Fuel consumption increases.
CUTTER SETTING STANDARDS:
Be sure to wear safety gloves.
Before filing:
f
Make sure the saw chain is held securely. (Fig. 20).
f
Make sure the engine is stopped.
f
Use a round file of proper size for your chain.
File size: 3,2mm for all models.
Place your file on the cutter and push straight forward.
Keep the file position as illustrated.
After every cutter has been set, check the depth gauge
and file it to the proper level as illustrated.
IMPORTANT
Be sure to round off the front edge to reduce the chance
of kickback or tie-strap breakage.
Make sure every cutter has the same length and edge
angles as illustrated.
GUIDE BAR
f
Reverse the bar occasionally to prevent partial wear.
f
The bar rail should always be a square. Check for wear
(Fig. 22) of the bar rail. Apply a ruler to the bar and the
outside of a cutter. If a gap is observed between them,
the rail is normal. Otherwise, the bar rail is worn. Such
a bar needs to be corrected or replaced.
(1) Ruler (2) Gap (3) No gap
STORAGE
1.
Empty the fuel tank and run the engine out of
fuel.
2.
Empty the oil tank.
3.
Clean the entire unit.
4.
Store the unit in a dry place out of the reach of
children.
WASTE DISPOSAL AND ENVIRONMENTAL
PROTECTION
Never pour remainders of chain lubricant or 2-stroke
fuel mixture in the drain or sewerage system or soil, but
dispose of it in a proper, environmentally friendly way,
e.g., at a special collecting point or dump. If your device
should become useless somewhere in the future or you
do not need it any longer, do not dispose of the device to-
gether with your domestic refuse, but dispose of it in an
environmentally friendly manner. Thoroughly empty the
oil/lubricant and fuel tanks and dispose of the remain
-
ders at a special collecting point or dump. Please also
dispose of the device itself at an according collecting/
recycling point. By doing so, plastic and metal parts can
be separated and recycled. Information concerning the
disposal of materials and devices are available from your
local administration.
WARRANTY
This product is warranted in accordance with the legal/
country specific regulations, effective from the date of
purchase by the first user. Damage attributable to nor
-
mal wear and tear, overload or improper handling will
be excluded from the warranty. In case of a claim, please
send the machine, completely assembled, to your dealer.
Type of
chain
File diameter
Top plate angle
Down angle
Head angle (55°)
Depth gauge
standard
Vise rotate angle
Vise angle
Side angle
Ε1
3,2mm
30°
10°
85°
0,52mm
Depth gauge
File
Содержание GCS 425T PRO
