English |
9
www.ffgroup-tools.com
CBC 242C PLUS - CBC 252C PLUS
MAINTENANCE SCHEDULE
Actions
Daily
Weekly
Monthly
Clean the outside area of the machine.
X
Check the harness for damages.
X
Make sure the correct operation of the throttle
and the throttle trigger lock.
X
Make sure that the handles and handle bar are
not damaged and secured.
X
Check the correct operation of the stop switch.
X
Check that the cutting equipment does not
rotate at the idle speed of the engine.
X
Check and clean the air filter as mentioned
above and replace it if needed.
X
Check the cutting equipment guard for damages
and replace it if needed.
X
Check the cutting equipment for cracks and
other damages. Replace if needed.
X
Check the locking nut of the cutting equipment
that is tightened appropriately.
X
Check for fuel leaks from the engine, fuel tank
and fuel lines.
X
Check the starter and starter cord for damages
and operation.
X
Check the electrode gap of the spark plug and
clean it.
X
Clean the outside area of the carburetor.
X
Check the quantity of grease in the bevel gear,
to be three quarters. Refill if needed.
X
Check the fuel lines for cracks and the fuel filter
for dirt deposits. Replace if needed.
X
Replace the spark plug.
X
Check the cables and lose connectors.
X
