EYELA FDU-1110 Скачать руководство пользователя страница 39

Страница: 39 / 40

- 35 -

2. Main Body Cleaning

Cleaning and maintenance of the product
should be made with appropriate
methods and items.

Do not apply water to the coating or inside the
product. Also, never use cleanser (polishing
powder), thinner, petroleum, kerosene, acid
or the like to clean or maintain the product.
It may cause electrical shocks or damage
to the product.

7-5. Cleaning and Maintenance of Product

1. Refrigerator Filter Cleaning

*Before cleaning the filter, be sure to turn off the Power

switch (earth leakage breaker) and the power source.

If the filter is clogged, cooling performance will be

deteriorated. Also, it may cause failure in refrigerator.

Since a degree of clogging on the filter depends on

environment in use or operating time, clean up the

filter regularly as follows.

(1) Open the Ventilation Cover.

(2) Remove the spring for the filter mount.

(3) Take out the filter, and brush the dust.

Then wash the filter using water or a neutral

detergent.

(4) Dry the filter completely. And reattach the filter in place.

Never touch the cooling fins with bare hands
during maintenance. Sharp edges of the fins
may hurt user’s hands.

Do not touch the cooling fins

with bare hands

Do not dissemble the equipment

Energized and heated components are
contained in the equipment. Contact with these
parts through disassembly may result in electric
shock or injury.

、

WARNING

* Do not use the dryer toward the filter.

Doing so may deform the filter material.

CAUTION

*Before cleaning the filter, be sure to turn off the Power

switch (earth leakage breaker) and the power source.

Wipe the surface of main body with tightly squeezed

soft cloth using water. If any dirt remains, use neutral

detergent. After using detergent, wipe the body

with a dry soft cloth.

Cooling Fin

Spring

Filter

Ventilation
Cover

Содержание FDU-1110









































Результаты поиска

Содержание FDU-1110

Отзывы:

Похожие инструкции для FDU-1110

Бренды по названию

Популярные бренды

EYELA FDU-1110, Инструкция по эксплуатации

Результаты поиска

Содержание FDU-1110

Отзывы:

Похожие инструкции для FDU-1110

Бренды по названию

Популярные бренды